Lumber Wrap Products



Polyethylene wraps are made from two types of ethylene polymers, high (HDPE) and low (LDPE) density polyethylene resins. The HDPE is extruded into a film which is then spun into spools of yarn. Then using the water jet looms, HDPE yarn is woven into a fabric. Then the woven fabric is coated using LDPE resin. The strength of the fabric depends on the mesh count.

All of our lumber wrap products are pretreated with Ultra Violet Inhibitor (UVI) for extended outdoor usage. In cold climates, sand or salt and other mixtures distributed on the roads can cause corrosion and a sand blasting type of effect. Whether you are transporting your goods by rail or truck, with our polyethylene or polypropylene wraps and bags, you can be assured that your product will arrive clean and dry.


Click for Specifications

PE Woven Lumber Wrap and Bags

  • Moisture resistant, Inhibits mold growth
  • UVI treated for extended resistance to sunlight
  • Fabric 8 x 8 mesh, Thickness 100 GSM +/- 5%
  • Up to 4 color printing and 144" in width
  • We can customize the mesh, thickness and the length of the roll as per customer requirements
  • Available in black / white or white / tan
  • Rolls can be C - folded or Lay flat
  • Bags are individually folded
  • Uses include klin dried lumber, treated wood, OSB, plywood, export shipments, remanufactured items, other building materials etc.


PP Woven Lumber Wrap and Bags

  • Used with composite products that are covered while still hot
  • Stronger than PE or woven poly
  • Higher melting temperature
  • UVI treated for extended resistance to sunlight
  • Fabric 8 x 8 mesh, Thickness 100 GSM +/- 5%
  • Up to 4 color printing and 144" in width
  • We can customize the mesh, thickness and the length of the roll as per customer requirements
  • Available in black / white or white / tan
  • Rolls can be C - folded or Lay flat
  • Bags are individually folded
  • Uses include klin dried lumber, treated wood, OSB, plywood, export shipments, remanufactured items, other building materials etc.

Click for Specifications



Click for Specifications

VCI Woven Lumber Wrap

  • Used for high moisture content lumber products
  • Top ply LDPE coated to provide better strength and better moisture barrier properties
  • Middle ply HDPE woven fabric
  • Inside ply laminated with specially matured Kraft paper one side impregnated with high-tech volatile corrosion inhibitor
  • Fabric 8 x 8 mesh, Thickness 100 GSM +/- 5%
  • Up to 4 color printing and 144" in width
  • We can customize the mesh, thickness and the length of the roll as per customer requirements
  • Available in black / white or white / tan
  • Rolls can be C - folded or Lay flat
  • Uses include klin dried lumber, treated wood, OSB, plywood, export shipments, beams, joists, other building materials etc.


Tarps

  • HDPE scrim and LDPE lamination on both sides
  • Reinforced PP rope in all four side hem
  • Double stitched or welded
  • Aluminium, polycarbonate, brass grommets at intervals
  • Plastic reinforced corner bars
  • UV and FR treatment available
  • Varity of colors and weights (up to 300 GSM) available
  • Uses include trailer awning, truck cover, machine, grain and hay cover, ground sheets, boat covers, pool cover, canopy, etc.


House Wrap

  • A thin membrane layer which acts as a moisture barrier and allows moisture vapour to move freely thus reducing the potential for condensation
  • Typically 0.03 mm to 0.38 mm in thickness
  • Consists of polyolefin based plastics like spun-bonded (fibres), cross woven (tapes), film (sheets) or a combination thereof
  • Polyolefin house wraps are typically stronger than felt building papers
  • Better durability than conventional building paper
  • Different widths and lengths of rolls available





Toll Free: 1-877-888-2615
info@abbeywrap.ca